01242 663149 
Maidaid C2035WSHR C Range Pass Through 500mm Rack Dishwasher with Internal Softener and Heat Recovery Unit
The Maidaid C2035WS is a commercial pass-through dishwasher including a heat recovery system that offers up to 25% less power required to heat rinse water, reduces the need for an extraction hood and improves working environment.
A user-friendly, soft-touch four button control panel and bright LED display allows for easy operation, a selectable energy saving mode alongside a patented dual flow wash pump, reducing power consumption whilst retaining wash efficiency.
This has 3 cycle times of 70, 90 and 120 seconds able to accommodate 500 x 500mm racks. Able to effectively wash 36 racks per hour, this features an automatic self-cleaning cycle with a moulded wash tank, so cleaning and maintaining is quick and easy.
Please note accessories are available for an additional charge upon order. Please specify voltage at time of order. Please contact our UK Sales team for more information.
Specifications
Dimensions
(W x D x H) mm: 640 x 745 x 2035 + Feet
Feet height mm: 165-225
Maximum useable height mm: 435
Door opening mm: 460
Capacity
Rack size mm: 500 x 500
Theoretical productivity Racks/h: 51
Effective productivity Racks/h: 36*
Tank capacity L: 15
*Allowing 30 seconds for reloading
Cycle times may vary depending on local conditions/services
Cycle Information
Number of standard cycles: 3
Standard cycles times Sec: 70/90/120
Special cycle: Eco, Glass, Long
Self-cleaning cycle: Full self clean
Water consumption per cycle L: 2
Wash temperature °C: 60 – adjustable
Rinse temperature °C: 82 – adjustable
Water Connection
Inlet water pressure Bar: 2 to 4
Flow rate L/Min L/Min: 6
Water inlet temp °C: 10 to 50
Water connection BSP: ¾”
Waste connection Ø: Int 29/ext 34
Power**
Installed power: 230V – 50Hz – 1N
AMP: 20 / kW: 4.5
AMP: 30* / kW: 6.5
Wash tank element kW: 2.1
Boiler element kW: 6.0
Wash pump kW: 0.47
Noise emission dB: ≤ 65
*Standard configuration. Optional 3 Phase 16A/6.5kW config available
**Please specify at time of order
Features
• HEAT RECOVERY offers up to 25% less power required to heat rinse water
• HR module supplied separately with simple bolt on instructions
• Reduces need for extraction hood and improves working environment
• Heat recovery, drain pump & improved continuous water softener design with increased range of water hardness settings
• Increased usable height
• Four button bright LED display with soft touch controls, twin traffic lights giving instant status updates & operational self-diagnostics
• Alarms menu with hi-level information retrieval
• Improved wash action from quick release parallel wash & rinse arm design
• Easy lift soft glide hood system
• Supplied with breaktank as standard
• Three standard cycle time options with further options available
• Cycle times can be tailored to site requirements
• Reduced water consumption
• Automatic self-cleaning at end of service
• Selectable energy saving mode
• Selectable thermostop ensures optimum rinse temperatures
• Patented dual flow wash pump – reducing power consumption whilst retaining wash efficiency
• Moulded wash tank for easy cleaning
• Surface scrap tray filters supplied as standard
• Accurate detergent and rinse aid peristaltic dosing pumps as standard
• Internal Rinse Booster Pump
• Supplied with one pegged rack, one open cup/glass rack & cutlery insert
• Single skin body construction
• Single skin door/hood construction
Accessories
• Z972001 – Additional racks 500 x 500mm – Plastic open glass/cup rack
• Z972003 – Additional racks 500 x 500mm – Plastic pegged plate rack
• Z972032 – Cutlery rack – 8 compartment cutlery insert for 500mm racks
• Q904006B – Pressure set and expansion vessel – Increases and regulates water pressure
• STARTER KIT – Chemical Starter Kit – 2 x 5 litres Low Temp Detergent, 2 x 5 litres Super Rinse Aid, 1 x 2 kg Salt
• 704002 – Stainless Steel scrap bin – Comes with castors and lid
• 717000 – Closed end table – L 700mm x D 645mm
• (L/H) 80201 / (R/H) 80200 – Closed end table – L 700mm x D 745mm
• (L/H) 80203 / (R/H) 80204 – Closed end table – L 1200mm x D 745mm
• (L/H) 80205 / (R/H) 80206 – Closed end table – L 1200mm x D 745mm
• (L/H) 80207 / (R/H) 80208 – Closed end table – L 1200mm x D 745mm
• Z600100 – Pre rinse Unit – Comes with monobloc without stem tap
• Z600105 – Pre rinse Unit – Comes with monobloc with stem tap 6″
• Z600200 – Pre rinse Unit – Twin Pillar without stem tap
• Z600205 – Pre rinse Unit – Twin Pillar with stem tap 6″
Documents
Unless otherwise stated, all deliveries are kerbside deliveries. This means we deliver to the kerb at your property, and you are responsible for moving equipment into position and installation.
If you would like to arrange installation through Rental+, please call our sales team on 01242 663149 to discuss the details.
You may also want to add additional accessories such as a stand, castors or connection hoses.
Please check with your Rental+ sales consultant when inquiring about this piece of equipment.
Rental+ makes it simpler and easier for new catering entrepreneurs to get their hands on the right catering equipment for their business.
You do not own the equipment, but simply pay an amount each month to use it. Service is inclusive and Rental+ will maintain the equipment for you.
We offer multi-year contracts. At the end of the hire you can send the equipment back with no penalty or continue renting it.
Do I need to pay for installation?
This depends on the equipment, but in most cases you will have to pay towards installation. We can arrange this for you in many cases, but if you want to arrange it yourself, that's OK too.
What will I have to pay?
We charge monthly for the equipment to make it easy to budget. At the start you pay three months rental upfront, but this will be returned to you when you complete your contract as long as the equipment is in good order.
What credit checks will you do?
We ask all our rental and hire clients to fill in a credit check form before we agree to send out equipment. It's conducted online through our partners at Experian, one of the world's leading experts in credit. The form takes five minutes and is easy to understand. This allows us to understand the right level of credit to extend, which protect our customers from undue financial burden.
Kerbside Deliveries
All deliveries, unless otherwise stated, are kerbside deliveries. This means we deliver to the kerb at your property, and you are responsible for moving them into position and installation.
If you would like to arrange installation through Rental+, please call our sales team on 01242 663149 to discuss the details.
What if I cannot afford a three-month advance rental?
Give us a call on 01242 663149 to chat through your options.
What happens if the equipment breaks down?
Rental+ will arrange for your equipment to be fixed if there is a problem with it. We have a 24-hour support line available for you to call to give peace of mind.
